Changes in 🟢 Core Ontology
- Maturity: 🟢 Released
Added
Classes
| Construct | Definition |
|---|---|
ContextualizedInformationSlot | information slot that has a context anchor slot and has an interpretation anchor slot |
InformationSlot | generically dependent continuant that mediates how information content entities are related, in a way that either prescribes or reports a corresponding relation among the entities the information content entities are about |
Object Properties
| Construct | Definition |
|---|---|
hasContextAnchorSlot | relation that holds between information slots u and s that are slots of the same information content entity, such that there exists an information slot t where (i) some information content entity a fills s and t is a slot of a, (ii) the slot type of t specifies the contextual condition under which the relation mediated by u is to be understood relative to s, and (iii) u and t have the same filler. |
hasFiller | relation between an information slot and an information content entity that holds when that information content entity is specified by the slot as the range-side participant in the linkage mediated by the slot |
hasInterpretationAnchorSlot | relation that holds between information slots u and t such that (i) u and t have the same filler, (ii) there exists an information slot s that is a slot of the same information content entity as u and is filled by an information content entity a of which t is a slot, and (iii) the slot type of t specifies the contextual condition under which the relation mediated by u is to be understood relative to s. |
hasSlot | inverse relation of is slot of |
isFillerOf | inverse relation of has filler |
isSlotOf | relation between an information slot and an information content entity that holds when the slot provides a way for that information content entity to be linked to another information content entity, and the information content entity is thereby designated as the domain-side participant in the linkage mediated by the slot |
prescribesToPrecedes | No natural language definition found |
Removed
Classes
| Construct | Definition |
|---|---|
Classifier | denoter that classifies some entity |
ComplexMaterialState | material state whose condition is an aggregated condition composed from the conditions of two or more material states that hold in it |
Consumable | material entity which has the consumable role |
ConsumableRole | role held by a material entity when it is planned to be, or is partially or fully used up in a planned process |
Container | material artifact designed to hold one or more material entities within a bounded interior, cavity, surface-delimited area, or contained site |
Denoter | information content entity that denotes some entity |
InputSpecification | information content entity that prescribes the entities to be used as inputs to a planned process or the attributes they must posses to serve as valid inputs |
MaterialContainmentCapability | capability of a material entity that is grounded in the entity’s physical structure and that can be realized in a process in which the entity holds one or more material entities within a bounded interior, cavity, surface-delimited area, or contained site |
MaterialContainmentFunction | material containment capability that is a function of a material entity |
MaterialStateConditionExpression | value expression that, as part of a material state specification, expresses a condition on a characteristic, profile, quality, location, or other relevant feature, to which the material state prescribed by that specification continuously conforms throughout its occurrence |
MaterialStateSpecification | information content entity that prescribes a material state |
OutputObjectiveSpecification | objective specification that prescribes the entities to be produced or modified in a planned process or the attributes they must posses to serve as valid outputs |
Object Properties
| Construct | Definition |
|---|---|
categorizedBy | relation between a lower-order classifier by a higher-order classifier such that the latter classifier categorizes the former |
categorizes | relation between classifiers in which a higher-order classifier classifies a lower-order classifier and designates a set that has as members only sets designated by lower-order classifiers that it organizes |
causes | relation between a process or event and another process or event that holds when the first has a post material state that is also a pre material state in virtue of which the second is initiated |
classifiedBy | relation that holds between an entity y and an information content entity x when the information content entity designates a set whose members are all the entities of a particular type and y is a member of that set |
classifies | relation that holds between an information content entity x and an entity y when the information content entity designates a set whose members are instances of a particular type and y is a member of that set |
controls | relation between a process profile and a process that holds when the process profile modulates the process and concretizes one or more action specifications as part of a planned process |
generalizes | relation between two classifiers such that everything classified by the latter is also classified by the former |
hasMaterialState | relation between a material entity and a material state in which the material entity participates throughout the material states duration |
hasPostMaterialState | relation between a process or event and a material state that holds when the process or event meets or overlaps the material state, or when the material state finishes the process or event |
hasPreMaterialState | relation between a process or event and a material state that holds when the material state meets, overlaps, or starts the process or event |
hasProcessProfile | relation that holds between a process and a process profile that is part of the process such that the part is temporally coextensive with another proper part that is mutually dependent on it and has no parts in common with it |
isMadeOfAtAllTimes | relation between material entity b and material entity that is not a fiat object c such that b has continuant part at all times c and if portion of c is removed from b, that portion stops being part of b, while the remaining c continues to exist as the same material entity and b remains to have continuant part c |
isMadeOfAtSomeTime | relation between material entity b and material entity that is not a fiat object c such that b has continuant part at some time c and if portion of c is removed from b, that portion stops being part of b, while the remaining c continues to exist as the same material entity and b remains to have continuant part c |
isMaterialStateOf | relation between a material state and a material entity that participates in that state throughout its duration |
materialStateholdsIn | relation between two material states that holds when the first material state is one of the states whose condition contributes to the aggregated condition of the second material state, and the first material state at least occurs for the duration of the second material state |
modulates | relation between a process and another process that holds when the first overlaps the second in time and every state changing temporal part of the first causes some temporal part of the second |
processProfileOf | relation that holds between a process profile and a process that it is part of such that the source process is a proper part of the target process and is temporally coextensive with another proper part of the target process that is mutually dependent on it and shares no parts with it. |
specializes | relation between two classifiers such that everything classified by the former is also classified by the latter |
hasPostCondition | relation between an action specification or plan specification and a material state specification such that every material state prescribed by the material state specification holds in a post-state of every process or event prescribed by the action specification or plan specification |
hasPreCondition | relation between an Action Specification or Plan Specification and a Material State Specification such that every material state prescribed by the Material State Specification holds in a pre-state of every process or event prescribed by the Action Specification or Plan Specification. |
Changed
Classes
Identifier
- IRI:
https://spec.industrialontologies.org/ontology/construct/Identifier
Annotations
-
explanatoryNote= “1. Identifier can be just one designative ICE or consist of a combination of them. It can also be a combination of other types of information; for example, in a particular domain of discourse, a combination of first name and last name can provide sufficient uniqueness for entities in that domain.- The designative property enforces uniqueness as it is a functional property. In other words, on the instance level, each instance of identifier designates exactly one instance of an entity.”
-
firstOrderLogicAxiom= “Identifier(x) → Denoter(x) ∧ ∃e(Entity(e) ∧ designates(x,e))” -
naturalLanguageDefinition= “denoter that is used to uniquely identify an entity within a particular context”@en-US -
semiFormalNaturalLanguageAxiom= “if x is an ‘identifier’ then x is an ‘denoter’ that ‘designates’ some ‘entity’”
-
explanatoryNote= “1. Identifier can be just one designative ICE or consist of a combination of them. It can also be a combination of other types of information; for example, in a particular domain of discourse, a combination of first name and last name can provide sufficient uniqueness for entities in that domain.- The designatiofive property enforces uniqueness as it is a functional property. In other words, on the instance level, each instance of identifier designates exactly one instance of an entity.”@en-US
-
firstOrderLogicAxiom= “Identifier(x) → InformationContentEntity(x) ∧ ∃e(Entity(e) ∧ designates(x,e))” -
naturalLanguageDefinition= “information content entity that is used to uniquely identify an entity within a particular context”@en-US -
semiFormalNaturalLanguageAxiom= “if x is an ‘identifier’ then x is an ‘information content entity’ that ‘designates’ some ‘entity’“@en-US
Parents
-
Denoter(https://spec.industrialontologies.org/ontology/construct/Denoter)
-
InformationContentEntity(https://spec.industrialontologies.org/ontology/construct/InformationContentEntity)
Axioms
-
SubClassOf: constr:Denoter
-
SubClassOf: constr:InformationContentEntity
InformationContentEntity
- IRI:
https://spec.industrialontologies.org/ontology/construct/InformationContentEntity
Disjoint With
-
InformationSlot(https://spec.industrialontologies.org/ontology/construct/InformationSlot)
Axioms
-
constr:InformationContentEntity DisjointWith: constr:InformationSlot
MaterialState
- IRI:
https://spec.industrialontologies.org/ontology/construct/MaterialState
Annotations
-
explanatoryNote= “1. Although the notion of “particular condition”; has not been introduced in this release, the IOF’s approach will be to model this as a dependent entity such that at any timeframe during which it exists, it depends on some material entity – meaning a material state will necessarily “be focused on” a particular condition of some material entity for which the state is ascribed. Condition here would encompass BFO: specifically-dependent continuants (qualities, dispositions and other realizable entities types) as well as site (the absolute or relative location of a material entity). In the future, the coverage will be expanded to include some currently “missing dependent entity types”; including orientation, and cases wherein a material entity is in a particular condition because it has or is in particular composition or configuration (e.g. the setup action of a machine and jig is complete and it is not in a setup/ready-for-run state).-
Unchanging, is intended to encompass not just having a particular condition for the duration of the state, but potentially being value-bound to some constant or even within a given range as prescribed by some design or requirement specification. Specialized sub-types may be introduced to handle such value-based constant and range-bound states and conditions.
-
The term as introduced here is not intended to be used for for modeling the states of non-real entities (e.g., virtual entities participating in virtual simulation program and any other informational or abstract entities, when they are considered to be in a particular condition).”
-
-
firstOrderLogicAxiom= “LA1: MaterialState(s) → ∃m(MaterialEntity(m) ∧ isMaterialStateOf(s,m))” -
firstOrderLogicAxiom= “LA2: ∀s,s′,m((isMaterialStateOf(s,m) ∧ occurrentPartOf(s′,s) ∧ Process(s′)) → (MaterialState(s′) ∧ isMaterialStateOf(s′,m)))” -
primitiveRationale= “Insufficient constructs to create necessary and sufficient conditions.”@en -
semiFormalNaturalLanguageAxiom= “LA1: if s is a ‘material state’, then s ‘is material state of’ a ‘material entity’” -
semiFormalNaturalLanguageAxiom= “LA2: if s ‘is material state of’ m and s’ is an ‘occurrent part of’ s that is a ‘process’ then s’ is a ‘material state’ that ‘is material state of’ m”
-
explanatoryNote= “1. Although the notion of “particular condition”; has not been introduced in this release, the IOF’s approach will be to model this as a dependent entity such that at any timeframe during which it exists, it depends on some material entity – meaning a material state will necessarily “be focused on” a particular condition of some material entity for which the state is ascribed. Condition here would encompass BFO: specifically-dependent continuants (qualities, dispositions and other realizable entities types) as well as site (the absolute or relative location of a material entity). In the future, the coverage will be expanded to include some currently “missing dependent entity types”; including orientation, and cases wherein a material entity is in a particular condition because it has or is in particular composition or configuration (e.g. the setup action of a machine and jig is complete and it is not in a setup/ready-for-run state).-
Unchanging, is intended to encompass not just having a particular condition for the duration of the state, but potentially being value-bound to some constant or even within a given range as prescribed by some design or requirement specification. Specialized sub-types may be introduced to handle such value-based constant and range-bound states and conditions.
-
The term as introduced here is not intended to be used for modeling what we might call the “state of a process” (e.g., equilibrium state for chemical, physical and biological processes or steady-state or discrete or continuous production processes), nor for modeling the states of non-real entities (e.g., virtual entities participating in virtual simulation program and any other informational or abstract entities, when they are considered to be in a particular condition). Extensions to the BFO framework as well as further work on ‘process characteristic’ may be first needed to handle these use cases and such specialized state classes will be introduced in a future release.”@en-US
-
-
firstOrderLogicAxiom= “MaterialState(x) → Process(x)” -
primitiveRationale= “There are insufficient constructs to create necessary and sufficient conditions. Namely, constructs to formalize range,limits and constant values over a period of time are still lacking.”@en-US -
semiFormalNaturalLanguageAxiom= “if x is a ‘material state’ then x is a ‘process’“@en-US
Axioms
-
SubClassOf: bfo:has_occurrent_part only (bfo:process_boundary or constr:MaterialState) -
SubClassOf: constr:isMaterialStateOf some bfo:material_entity
MeasuredValueExpression
- IRI:
https://spec.industrialontologies.org/ontology/construct/MeasuredValueExpression
Annotations
-
firstOrderLogicDefinition= “MeasuredValueSpecification(x) ↔ ValueExpression(x) ∧ ∃e((TemporalRegion(e) ∨ ProcessCharacteristic(e) ∨ ProcessProfile(e) ∨ SpecificallyDependentContinuant(e)) ∧ isMeasuredValueOfAtSomeTime(x,e))” -
naturalLanguageDefinition= “value expression that contains the measured value of an attribute (specifically dependent continuant or process characteristic or process profile or temporal region)”@en-US -
semiFormalNaturalLanguageDefinition= “every instance of ‘measured value expression’ is defined exactly as an instance of ‘information content entity’ that ‘is measured value of at some time’ some ‘process characteristic’ or ‘process profile’ or ‘temporal region’ or ‘specifically dependent continuant’”
-
firstOrderLogicDefinition= “MeasuredValueSpecification(x) ↔ ValueExpression(x) ∧ ∃e((TemporalRegion(e) ∨ ProcessCharacteristic(e) ∨ SpecificallyDependentContinuant(e)) ∧ isMeasuredValueOfAtSomeTime(x,e))” -
naturalLanguageDefinition= “value expression that contains the measured value of an attribute (specifically dependent continuant or process characteristic or temporal region)”@en-US -
semiFormalNaturalLanguageDefinition= “every instance of ‘measured value expression’ is defined exactly as an instance of ‘information content entity’ that ‘is measured value of at some time’ some ‘process characteristic’ or ‘temporal region’ or ‘specifically dependent continuant’“@en-US
Axioms
-
EquivalentTo: constr:ValueExpression and constr:isMeasuredValueOfAtSomeTime some (bfo:temporal_region or bfo:specifically_dependent_continuant or bfo:process_profile or constr:ProcessCharacteristic)
-
EquivalentTo: constr:ValueExpression and constr:isMeasuredValueOfAtSomeTime some (bfo:temporal_region or bfo:specifically_dependent_continuant or constr:ProcessCharacteristic)
MeasurementInformationContentEntity
- IRI:
https://spec.industrialontologies.org/ontology/construct/MeasurementInformationContentEntity
Annotations
-
firstOrderLogicDefinition= “LA1: MeasurementInformationContentEntity(x) ↔ InformationContentEntity(x) ∧ ∃y∃z∃m∃p(((IndependentContinuant(y) ∧ ¬SpatialRegion(y) ∧ SpecificallyDependentContinuant(z) ∧ bearerOf(y,z)) ∨ ((Process(y) ∨ ProcessBoundary(y)) ∧ TemporalRegion(z) ∧ occupiesTemporalRegion(y,z)) ∨ (Process(y) ∧ ProcessCharacteristic(z) ∧ processCharacteristicOf(z,y)) ∨ (ProcessProfile(z) ∧ processProfileOf(z,y))) ∧ MeasuredValueExpression(m) ∧ MeasurementProcess(p) ∧ isAbout(x,y) ∧ describes(x,z) ∧ hasContinuantPartAtAllTimes(x,m) ∧ isMeasuredValueOf(m,y) ∧ isOutputOf(x,p))” -
semiFormalNaturalLanguageDefinition= “every instance of ‘measurement information content entity’ is defined as exactly an instance of ‘information content entity’ that ‘is about’ some ‘independent continuant’ or ‘process’ or ‘process boundary’, and ‘describes’ some ‘specifically dependent continuant’, ‘temporal region’, ‘process characteristic’, or ‘process profile’, and ‘has continuant part at all times’ some ‘measured value expression’, and ‘is measured value of’ that entity, and ‘is output of’ some ‘measurement process’”
-
firstOrderLogicDefinition= “MeasurementInformationContentEntity(x) ↔ InformationContentEntity(x) ∧ ∃y∃z∃m∃p(((IndependentContinuant(y) ∧ ¬(SpatialRegion(y)) ∧ SpecificallyDependentContinuant(z) ∧ bearerOf(y,z)) ∨ (Process(y) ∨ ProcessBoundary(y) ∧ TemporalRegion(z) ∧ occupiesTemporalRegion(y,z)) ∨ (Process(y) ∧ ProcessCharacteristic(z) ∧ processCharacteristicOf(z,y))) ∧ MeasuredValueExpression(m) ∧ MeasurementProcess(p) ∧ isAbout(x,y) ∧ describes(x,z) ∧ hasContinuantPartAtAllTimes(x,m) ∧ isMeasuredValueOf(m,y) ∧ isOutputOf(x,p))” -
semiFormalNaturalLanguageDefinition= “every instance of ‘measurement information content entity is defined as exactly an instance of ‘information content entity’ that is ‘output of’ some ‘measurement process’ that ‘describes’ some ‘specifically dependent continuant’ or ‘temporal region’ or ‘process characteristic’ y that are an attribute of (‘inhere in’ or ‘process characteristic of’ or temporally occupied by) a ‘process’ or ‘process boundary’ or ‘independent continuant’(that is not a ‘spatial region’) the ‘measurement information content entity’ ‘is about’ and that ‘has continuant part at all times’ some ‘measured value expression’ that ‘is measured value of’ y”@en-US
Axioms
-
EquivalentTo: constr:InformationContentEntity and bfo:has_continuant_part_at_all_times some constr:MeasuredValueExpression and constr:describes some (bfo:temporal_region or bfo:specifically_dependent_continuant or bfo:process_profile or constr:ProcessCharacteristic) and constr:isAbout some (bfo:process or bfo:process_boundary or (bfo:independent_continuant and not bfo:spatial_region)) and constr:isOutputOf some constr:MeasurementProcess
-
EquivalentTo: constr:InformationContentEntity and bfo:has_continuant_part_at_all_times some constr:MeasuredValueExpression and constr:describes some (bfo:temporal_region or bfo:specifically_dependent_continuant or constr:ProcessCharacteristic) and constr:isAbout some (bfo:process or bfo:process_boundary or (bfo:independent_continuant and not bfo:spatial_region)) and constr:isOutputOf some constr:MeasurementProcess
MeasurementProcess
- IRI:
https://spec.industrialontologies.org/ontology/construct/MeasurementProcess
Annotations
-
firstOrderLogicAxiom= “LA1: MeasurementProcess(x) ↔ PlannedProcess(x) ∧ ∃m∃y∃z∃c(MaterialEntity(m) ∧ MeasurementCapability(c) ∧ hasCapability(m,c) ∧ (((IndependentContinuant(y) ∧ ¬SpatialRegion(y)) ∧ SpecificallyDependentContinuant(z) ∧ bearerOf(y,z) ∧ participatesInAtSomeTime(y,x)) ∨ ((Process(y) ∨ ProcessBoundary(y)) ∧ TemporalRegion(z) ∧ occupiesTemporalRegion(y,z) ∧ ∃t(temporalRegion(t) ∧ occupiesTemporalRegion(x,t) ∧ (occurrentPartOf(t,z) ∨ hasOccurrentPart(t,z))) ∨ (ProcessCharacteristic(z) ∧ processCharacteristicOf(z,y)) ∨ (ProcessProfile(z) ∧ processProfileOf(z,y) ∧ (preceedes(y,x) ∨ ∃t1∃t2(temporalRegion(t1) ∧ temporalRegion(t2) ∧ occupiesTemporalRegion(x,t1) ∧ occupiesTemporalRegion(y,t2) ∧ (occurrentPartOf(t1,t2) ∨ hasOccurrentPart(t1,t2))))))) ∧ measuresAtSomeTime(m,z)) ∧ ∀b(hasSpecifiedOutput(x,b) → MeasurementInformationContentEntity(b))” -
naturalLanguageDefinition= “planned process to determine the value of an attribute (specifically dependent continuant or temporal region or process characteristic or process profile) of an entity of interest”@en-US -
semiFormalNaturalLanguageAxiom= “if x is a ‘measurement process’ then x is a ‘planned process’ that ‘has participant at some time’ some ‘material entity’ y that ‘has capability’ some ‘measurement capability’ and y ‘measures at some time’ either (1) a ‘process characteristic’ that is ‘process characteristic of’ a ‘process’ that ‘precedes’ or temporally overlaps with x, or (2) a ‘specifically dependent continuant’ that ‘inheres in’ an ‘independent continuant’ (not a ‘spatial region’) which ‘participates in at some time’ x, or (3) a ‘temporal region’ that is ‘occupied by’ some ‘process’ or ‘process boundary’ and that ‘has occurrent part’ or is ‘occurrent part of’ a ‘temporal region’ that is ‘occupied by’ x, or (4) a ‘process profile’ that is ‘process profile of’ a ‘process’ that ‘precedes’ or temporally overlaps with x, and whenever x ‘has specified output’ b, b must be a ‘measurement information content entity’.”
-
firstOrderLogicAxiom= “MeasurementProcess ↔ PlannedProcess(x) ∧ ∃m∃y∃z∃c(MaterialEntity(m) ∧ MeasurementCapability(c) ∧ hasCapability(m,c) ∧ (((IndependentContinuant(y) ∧ ¬(SpatialRegion(y))) ∧ SpecificallyDependentContinuant(z) ∧ bearerOf(y,z) ∧ participatesInAtSomeTime(y,x)) ∨ (Process(y) ∨ ProcessBoundary(y) ∧ TemporalRegion(z) ∧ occupiesTemporalRegion(y,z) ∧ ∃t(temporalRegion(t) ∧ occupiesTemporalRegion(x,t) ∧ (occurrentPartOf(t,z) ∨ hasOccurrentPart(t,z)))) ∨ (Process(y) ∧ ProcessCharacteristic(z) ∧ processCharacteristicOf(z,y) ∧ (preceedes(y,x) ∨ ∃t1∃t2(temporalRegion(t1) ∧ temporalRegion(t2) ∧ occupiesTemporalRegion(x,t1) ∧ occupiesTemporalRegion(y,t2) ∧ (occurrentPartOf(t1,t2) ∨ hasOccurrentPart(t1,t2)))))) ∧ measuresAtSomeTime(m,z)) ∧ ∀b(hasSpecifiedOutput(x,b) → MeasurementInformationContentEntity(b))” -
naturalLanguageDefinition= “planned process to determine the value of an attribute (specifically dependent continuant or temporal region or process characteristic) of an entity of interest”@en-US -
semiFormalNaturalLanguageAxiom= “if x is a ‘measurement process’ then x is a ‘planned process’ that ‘has participant at some time’ some ‘material entity’ y that ‘has measurement capability’ and y ‘measures at some time’ either 1) ‘process characteristic’ that is ‘process characteristic of’ a ‘process’ that ‘preceedes’ or (partially or fully) temporally coincides with x) or 2)’specifically dependent continuant’ that ‘inheres in’ an ‘independent continuant’ (that is not a ‘spatial region’) which ‘participates in at some time’ x or 3) ‘temporal region’ that is temporally occupied by some ‘process’ or ‘process boundary’ and that ‘has occurrent part’ or ‘occurent part of’ a ‘temporal region’ temporally occupied by x and whenever x ‘has specified output’ b that b must be a ‘measurement information content entity’“@en-US
Axioms
-
SubClassOf: bfo:has_participant_at_some_time some ((bfo:material_entity and constr:hasCapability some constr:MeasurementCapability) and constr:measuresAtSomeTime some (bfo:temporal_region or bfo:specifically_dependent_continuant or bfo:process_profile or constr:ProcessCharacteristic))
-
SubClassOf: bfo:has_participant_at_some_time some ((bfo:material_entity and constr:hasCapability some constr:MeasurementCapability) and constr:measuresAtSomeTime some (bfo:temporal_region or bfo:specifically_dependent_continuant or constr:ProcessCharacteristic))
ObjectiveSpecification
- IRI:
https://spec.industrialontologies.org/ontology/construct/ObjectiveSpecification
Annotations
-
firstOrderLogicAxiom= “InformationContentEntity(x) ∧ ∃y∃p(Process(p) ∧ isAchievedByAtSomeTime(x,p) ∧ ((ProcessCharacteristic(y) ∧ processCharacteristicOf(y,p)) ∨ (ProcessProfile(y) ∧ processProfileOf(y,p)) ∨ (Capability(y) ∧ hasRealization(x,y)) ∨ (Continuant(y) ∧ isOutputOf(y,p))) ∧ prescribes(x,y)) → ObjectiveSpecification(x)” -
semiFormalNaturalLanguageAxiom= “if x is an ‘information content entity’ and x ‘is achieved by at some time’ some ‘process’ p, and x ‘prescribes’ some y that is either a ‘process characteristic’ that is ‘process characteristic of’ p, or a ‘process profile’ that is ‘process profile of’ p, or a ‘capability’ that x ‘has realization’ of, or a ‘continuant’ that ‘is output of’ p, then x is an ‘objective specification’.”
-
firstOrderLogicAxiom= “InformationContentEntity(x) ∧ ∃y∃p(Process(p) ∧ isAchievedByAtSomeTime(x,p) ∧ ((ProcessCharacteristic(y) ∧ processCharacteristicOf(y,p))∨ (Capability(y) ∧ hasRealization(x,y)) ∨ (Continuant(c) ∧ isOutputOf(c,p))) ∧ prescribes(x,y)) → ObjectiveSpecification(x)” -
semiFormalNaturalLanguageAxiom= “if x is an ‘information content entity’ that ‘is achieved by at some time’ some ‘process’ p and that ‘prescribes’ some ‘process characteristic’ which is a ‘process characteristic of’ p or ‘capability’ that ‘has realization’ p or ‘continuant’ c that is ‘output of’ p then x is an ‘objective specification’“@en-US
Axioms
-
constr:InformationContentEntity and constr:isAchievedByAtSomeTime some bfo:process and constr:prescribes some (bfo:process_profile or constr:Capability or constr:ProcessCharacteristic or (bfo:continuant and constr:isOutputOf some bfo:process)) SubClassOf: constr:ObjectiveSpecification
-
constr:InformationContentEntity and constr:isAchievedByAtSomeTime some bfo:process and constr:prescribes some (constr:Capability or constr:ProcessCharacteristic or (bfo:continuant and constr:isOutputOf some bfo:process)) SubClassOf: constr:ObjectiveSpecification
ProcessCharacteristic
- IRI:
https://spec.industrialontologies.org/ontology/construct/ProcessCharacteristic
Annotations
-
example= “The maximum temperature of a heating process, the average wind speed of a turbine operation process, total fuel consumed in a boiling process, the peak RPM of a engine running process, overall noise level (good, fair, or poor) of a transmission process, average throughput of a production process”@en-US -
counterExample= “temperature curve during heating, heart rate over time during exercise, RPM vs time for an engine, count-per-minute variation during production, daily average temprature over last month” -
explanatoryNote= “1) A process characteristic is a continuant rather than an occurrent because it characterizes a process as a single whole rather than as something that unfolds in time. Unlike a process or a process profile, which has different temporal parts occupying different temporal regions, a process characteristic has no part tied to time. The summarization of the target attribute considers all of its temporal parts—for example, the maximum temperature can only be known by considering the entire temperature profile of a heating process.2) The “attribute” mentioned in the definition is the specific feature of a process whose time-dependent behavior are captured by a ‘process profile’, but which may be summarized by a ‘process characteristic’ over the whole duration of the process.
3) Summarization means describing an attribute of a process with a single overall characterization instead of representing how it varies over time. For example, the speed profile of a car’s movement can be summarized by taking average of all instantaneous speeds over the entire duration the movement occurred, e.g., 45kmph average speed. However, the summarization may also be qualitative for some type process characteristics, e.g., the heartbeat was steady or stuttering.”
-
firstOrderLogicAxiom= “∀c, c’, x, x′(processCharacteristicOf(c, x) ∧ continuantPartOf(c’, c) ∧ temporalPartOf(x′,x) → ¬ processCharacteristicOf(c’,x′))” -
firstOrderLogicDefinition= “ProcessCharacteristic(x) ↔ Continuant(x) ∧ ∃p(Process(p) ∧ processCharacteristicOf(x, p))” -
naturalLanguageDefinition= “continuant that summarizes an attribute of a process over its entire duration, providing a time-independent characterization of the process as a whole”@en-US -
primitiveRationale= “The construct is primitive because of the following two ideosyncratic design decisions which may require re-evaluation in the future. 1) The construct is defined using a trans-ontological relation ‘process characteristics of’, which relates a ‘continuant’ to a ‘process’, an ‘occurrent’. 2) The consruct is broadly classified as ‘continuant’, without further specialization.” -
semiFormalNaturalLanguageAxiom= “if c is ‘process characteristic of’ x and c′ is a ‘continuant part of’ c and x′ is a ‘temporal part of’ x, then c′ is not ‘process characteristic of’ x′” -
semiFormalNaturalLanguageDefinition= “every instance of ‘process characteristic’ is defined as exactly an instance of ‘continuant’ that is ‘process characteristic of’ some ‘process’”
-
example= “the rate of production of a product production process, heart rate, the rate of temperature change resulting from a heating process”@en-US -
explanatoryNote= “Here ‘attribute’ is not a technical term.”@en-US -
firstOrderLogicAxiom= “ProcessCharacteristic(x) → Occurrent(x)” -
naturalLanguageDefinition= “attribute of a process”@en-US -
primitiveRationale= “This term is expected to remain primitive as it is highly unlikely that a a set of conditions will be created such that no circularity is introduced.”@en-US -
semiFormalNaturalLanguageAxiom= “if x is a ‘process characteristic’ then x is an ‘occurrent’“@en-US
Parents
-
BFO_0000002(http://purl.obolibrary.org/obo/BFO_0000002)
-
BFO_0000003(http://purl.obolibrary.org/obo/BFO_0000003)
Axioms
-
EquivalentTo: bfo:continuant and constr:processCharacteristicOf some bfo:process -
SubClassOf: bfo:continuant
-
SubClassOf: bfo:occurrent
TemporalDurationValueExpression
- IRI:
https://spec.industrialontologies.org/ontology/construct/TemporalDurationValueExpression
Annotations
-
label= “temporal duration value expression”@en-US -
example= “the expression of the duration of the temporal interval that corresponds to the time during which a worker sewed a particular garment.”@en-US -
firstOrderLogicAxiom= “TemporalDurationValueExpression(x) → ValueExpression(x) ∧ ∃y(TimeInterval(y) ∧ isValueExpressionOfAtAllTimes(x,y))” -
isPrimitive= “True” -
primitiveRationale= “The definition of this class is weakened to only necessary condition because the current formal conditions do not specify which characteristic of the temporal interval is being expressed; without a mechanism to formally distinguish duration from other temporal qualities (e.g., temporal position), the construct cannot be given a necessary-and-sufficient definition. Until such representational machinery exists—i.e., a property or formal device that links a value expression specifically to the duration quality of a temporal interval—the conditions can function only as necessary, not necessary and sufficient, making this class primitive.” -
semiFormalNaturalLanguageAxiom= “every instance of ‘temporal duration value expression’ is an instance of ‘value expression’ that ‘is value expression of at all times’ some ‘temporal interval’”
-
label= “temporal interval value expression”@en-US -
example= “the expression of the duration that is taken by an average worker to sew a garment.”@en-US -
firstOrderLogicDefinition= “TemporalDurationValueExpression(x) ↔ ValueExpression(x) ∧ ∃y(TimeInterval(y) ∧ isValueExpressionOfAtAllTimes(x,y))” -
semiFormalNaturalLanguageDefinition= “every instance of ‘temporal duration value expression’ is defined exactly as an instance of ‘value expression’ that ‘is value expression of at all times’ some ‘temporal interval’“@en-US
Axioms
-
SubClassOf: constr:ValueExpression and constr:isValueExpressionOfAtAllTimes some bfo:temporal_interval -
SubClassOf: owl:Thing
-
EquivalentTo: constr:ValueExpression and constr:isValueExpressionOfAtAllTimes some bfo:temporal_interval -
SubClassOf: constr:ValueExpression
Object Properties
hasProcessCharacteristic
- IRI:
https://spec.industrialontologies.org/ontology/construct/hasProcessCharacteristic
Annotations
-
example= “the water flowing through a pipe during a given period has the average flow rate as a process characteristic, the heating process has the total energy consumed as a process characteristic, the batch sterilization process has the peak temperature as a process characteristic.”@en-US -
firstOrderLogicDefinition= “hasProcessCharacteristics(p, c) → processCharacteristicsOf(c, p)” -
semiFormalNaturalLanguageDefinition= “if p ‘has process characteristics’ c, then c is ‘process characteristics of’ p”
-
example= “product production process has process characteristic constant production rate; heating process has process characteristic temperature change of 5F/min”@en-US
processCharacteristicOf
- IRI:
https://spec.industrialontologies.org/ontology/construct/processCharacteristicOf
Annotations
-
example= “The average flow rate is a process characteristic of the water flowing through a pipe during a given period, the total energy consumed is a process characteristic of the heating process, the peak temperature is a process characteristic of the batch sterilization process.”
-
example= “constant production rate is the process characteristic of a product production process; temperature change of 1C/min is the process characteristic of a heating process”@en-US
temporallyFinishedBy
- IRI:
https://spec.industrialontologies.org/ontology/construct/temporallyFinishedBy
Annotations
-
naturalLanguageDefinition= “relation that holds between two intervals or processes i and j when the last instant of the temporal extent of j is the same as the last instant of the temporal extent of i and the first instant of i is preceded by the first instant of j”@en-US
-
naturalLanguageDefinition= “relation that holds between two intervals or processes i and j when the last instant of the temporal extent of j is the same as the last instant of the temporal extent of i and the first instant of i is precedes the first instant of j”@en-US
temporallyFinishes
- IRI:
https://spec.industrialontologies.org/ontology/construct/temporallyFinishes
Annotations
-
naturalLanguageDefinition= “relation that holds between two intervals or processes i and j when the last instant of the temporal extent of i is the same as the last instant of the temporal extent of j and the first instant of j precedes the first instant of i”@en-US
-
naturalLanguageDefinition= “relation that holds between two intervals or processes i and j when the last instant of the temporal extent of i is the same as the last instant of the temporal extent of j and the first instant of j is precedes the first instant of i”@en-US