Changes in 🟢 Biopharma Manufacturing Execution Ontology

  • Maturity: 🟢 Released

Added

Classes

Construct Definition
ConcentrationProcess planned process in which the concentration of a constituent is increased
FiltrationAidApplicationProcess planned process in which filtration aid is incorporated into material to be filtered or deposited onto a filter to improve filtration performance
FlushingProcess planned process in which a fluid is used to displace or remove residual material from a recipient

Changed

Classes


DepthFiltrationProcess

  • IRI: https://spec.industrialontologies.org/ontology/construct/DepthFiltrationProcess

Annotations

  • naturalLanguageDefinition = “filtration process in which a fluid is passed through a depth filter”@en-US

  • naturalLanguageDefinition = “filtration process in which a depth filter is used to separate constituents of a fluid”@en-US


DiafiltrationProcess

  • IRI: https://spec.industrialontologies.org/ontology/construct/DiafiltrationProcess

Annotations

  • explanatoryNote = “Diafiltration can be conducted either in a continuous or discontinuous manner: Continuous diafiltration: Buffer is added continuously as filtrate is removed, maintaining a constant volume and concentration of the target molecule. Discontinuous diafiltration: Involves diluting the sample, concentrating it back, and repeating this process multiple times.”

  • naturalLanguageDefinition = “planned process that consists of either multiple cycles of dilution followed by filtration, or of dilution and filtration occurring simultaneously, to remove unretained solutes or to exchange the solution’s solvent or buffer environment”@en-US

  • explanatoryNote = “Diafiltration can be conducted either in a continuous or discontinuous manner: Continuous diafiltration: Buffer is added continuously as filtrate is removed, maintaining a constant volume and concentration of the target molecule. Discontinuous diafiltration: Involves diluting the sample and concentrating it back, with the cycle repeated as needed.”@en-US

  • naturalLanguageDefinition = “planned process that consists of either one or more cycles of dilution followed by filtration, or of dilution and filtration occurring simultaneously, to remove unretained solutes or to exchange the solution’s solvent or buffer environment”@en-US


DirectFlowFiltration

  • IRI: https://spec.industrialontologies.org/ontology/construct/DirectFlowFiltration

Annotations

  • naturalLanguageDefinition = “filtration in which the fluid travels in the direction that is perpendicular to the surface of the filter”@en-US

  • naturalLanguageDefinition = “filtration process in which fluid undergoing filtration flows perpendicular to the surface of the filter medium”@en-US


FiltrationProcess

  • IRI: https://spec.industrialontologies.org/ontology/construct/FiltrationProcess

Annotations

  • explanatoryNote = “1) Passing can be conducted by using gravity or by using pressure. 2) According to the direction of the fluid feed in relation to the filter medium there are two broad types of filtrations. In conventional (a.k.a normal, direct, perpendicular) filtration, the fluid flows perpendicular to the medium which results in a cake of solids depositing on the filter medium. In tangential flow filtration the fluid flows parallel to the medium to minimize buildup of solids on the medium. Given that flow direction is the key differentiating characteristic, tangential flow filtration and normal flow filtration (direct flow filtration) are modeled as defined subclasses of filtration. 3) Filtration is a separation technique predominantly based on particle size, where components are retained or passed through a porous medium depending on their dimensions relative to the pore size. However, in some cases, additional characteristics such as particle shape and electrostatic charge can significantly influence retention behavior and selectivity of the filter used in the process.”

  • firstOrderLogicAxiom = “FiltrationProcess(x) → PlannedProcess(x) ∧ ∃y (Filter(y) ∧ hasParticipantAtSomeTime(x, y))”

  • naturalLanguageDefinition = “planned process in which suspended solids or dissolved components are separated from a fluid by passing it through a filter”@en-US

  • semiFormalNaturalLanguageAxiom = “if x is a ‘filtration process’ then x is a ‘planned process’ and ‘has participant at some time’ some ‘filter’”

  • explanatoryNote = “1) Filtration may involve liquid or gaseous fluids. Fluid flow through a filter may be driven by gravity, an applied pressure difference, or centrifugal force. 2) Based on the direction of fluid flow relative to the filter medium, two broad types of filtration are distinguished. In normal-flow filtration (also called direct-flow filtration), the fluid undergoing filtration flows predominantly perpendicular to the filter medium. In tangential-flow filtration, the fluid flows predominantly tangentially along the medium. 3) Filtration selectivity commonly depends on particle or solute size relative to the retention characteristics of the filter medium. Other factors, including particle shape, adsorption, entrapment, and electrostatic interactions, may also influence retention and separation. 4) Depending on the filtration configuration and process boundaries, outputs may include filtrate, retentate, or both.”@en-US

  • firstOrderLogicAxiom = “FiltrationProcess(x) → PlannedProcess(x) ∧ ∃f (Filter(f) ∧ hasParticipantAtSomeTime(x, f)) ∧ ∃i∃q (MaterialEntity(i) ∧ hasInput(x, i) ∧ FluidAggregateState(q) ∧ hasQuality(i, q)) ∧ ∃m∃r (MaterialEntity(m) ∧ hasOutput(x, m) ∧ hasRole(m, r) ∧ (FiltrateRole(r) ∨ RetentateRole(r)))”

  • naturalLanguageDefinition = “planned process in which a filter is used to separate constituents of a fluid through selective passage or retention”@en-US

  • semiFormalNaturalLanguageAxiom = “if x is a ‘filtration process’ then x is a ‘planned process’ that ‘has participant at some time’ some ‘filter’, ‘has input’ some ‘material entity’ that ‘has quality’ some ‘fluid aggregate state’, and ‘has output’ some ‘material entity’ that ‘has role’ some ‘filtrate role’ or some ‘material entity’ that ‘has role’ some ‘retentate role’“@en-US

Axioms

  • SubClassOf: constr:hasInput some (bfo:material_entity and constr:hasQuality some constr:FluidAggregateState)

  • SubClassOf: constr:hasOutput some ((bfo:material_entity and constr:hasRole some constr:FiltrateRole) or (bfo:material_entity and constr:hasRole some constr:RetentateRole))


MembraneFiltrationProcess

  • IRI: https://spec.industrialontologies.org/ontology/construct/MembraneFiltrationProcess

Annotations

  • naturalLanguageDefinition = “filtration process in which a fluid is passed through a membrane”@en-US

  • naturalLanguageDefinition = “filtration process in which a membrane filter is used to separate constituents of a fluid”@en-US


NanofiltrationProcess

  • IRI: https://spec.industrialontologies.org/ontology/construct/NanofiltrationProcess

Annotations

  • example = “A nanofiltration process is used to remove endotoxins while allowing most proteins to pass through; A nanofiltration process concentrates therapeutic peptides while separating out small salts and solvents; A nanofiltration process is applied after viral inactivation to clear potential viral contaminants; A nanofiltration process is used to reduce water content and impurities in antibiotic purification;”

  • explanatoryNote = “The stated pore-size values indicate the characteristic scale associated with nanofiltration and are not intended to establish exact lower or upper classification boundaries. A membrane filtration process may still be classified as a nanofiltration process when the nominal pore-size rating lies near or modestly outside this interval, provided that the membrane and its retention performance are recognized as nanofiltration.”

  • naturalLanguageDefinition = “filtration process in which a membrane filter that is used has pore size in the range of 0.001 to 0.01 μm”@en-US

  • example = “Nanofiltration of water to reduce hardness by preferentially retaining calcium and magnesium ions; Nanofiltration of aqueous solutions to selectively retain low-molecular-weight organic solutes; Virus-retentive nanofiltration of therapeutic protein solutions to reduce viral particle content”@en-US

  • acronym = “NF”

  • adaptedFrom = “http://purl.obolibrary.org/obo/CHMO_0001642”

  • explanatoryNote = “1) In dissolved-solute separations, nanofiltration membranes generally exhibit greater rejection of multivalent ions than monovalent ions and may selectively retain low-molecular-weight organic solutes. In biopharmaceutical manufacturing, nanofiltration also encompasses virus-retentive membrane filtration. Retention need not be complete and depends on membrane characteristics, constituent properties, and operating conditions. 2) Nanofiltration membranes may be characterized by molecular-weight cutoff (MWCO) or nominal or effective pore size. For dissolved-solute separations, EPA reports a typical MWCO of 200–1,000 Da and WHO cites pore sizes of approximately 1–10 nm. For virus-retentive applications, WHO documents 15 and 35 nm nanofilters, while Roth et al. (2020; https://doi.org/10.1111/trf.16022) report nanofiltration platforms with nominal pore sizes of 15–50 nm in their viral clearance validation dataset. These values are indicative rather than strict classification boundaries. Classification should consider the specified retention target and demonstrated performance, recognizing potential overlap with ultrafiltration and reverse osmosis.”@en-US

  • naturalLanguageDefinition = “membrane filtration process in which a membrane preferentially restricts the passage of low-molecular-weight dissolved solutes or nanoscale constituents of a fluid”@en-US


PlannedTransductionProcess

  • IRI: https://spec.industrialontologies.org/ontology/construct/PlannedTransductionProcess

Annotations

  • explanatoryNote = “This class is restricted to planned applications of transduction, such as therapeutic, manufacturing, or experimental procedures. Examples include lentiviral transduction of T cells in CAR-T therapy, adeno-associated viral (AAV) gene delivery in gene therapy, and bacteriophage-mediated gene transfer in synthetic biology. Natural occurrences of transduction (e.g., bacteriophage-driven horizontal gene transfer in the environment) are out of scope and can be captured through external biological process ontologies (e.g., transduction in GO).”

  • explanatoryNote = “This class is restricted to planned applications of transduction, such as therapeutic, manufacturing, or experimental procedures. Examples include lentiviral transduction of T cells in CAR-T therapy, adeno-associated viral (AAV) gene delivery in gene therapy, and bacteriophage-mediated gene transfer in synthetic biology. Natural occurrences of transduction (e.g., bacteriophage-driven horizontal gene transfer in the environment) are out of scope and can be captured through external biological process ontologies (e.g., transduction in GO). In this context, modification of a cell’s genetic material includes the introduction of exogenous DNA or RNA and does not require alteration of or integration into the host genome.”@en-US


TangentialFlowFiltration

  • IRI: https://spec.industrialontologies.org/ontology/construct/TangentialFlowFiltration

Annotations

  • naturalLanguageDefinition = “filtration process in which the liquid travels tangentially across the surface of the membrane or bed filter”@en-US

  • naturalLanguageDefinition = “filtration process in which fluid undergoing filtration flows tangentially along the surface of the filter medium”@en-US


ThawingProcess

  • IRI: https://spec.industrialontologies.org/ontology/construct/ThawingProcess

Annotations

  • firstOrderLogicAxiom = “ThawingProcess(x) → PlannedProcess(x) ∧ ∃y ∃c (PieceOfEquipment(y) ∧ ThawingCapability(c) ∧ hasCapability(y, c) ∧ hasParticipantAtSomeTime(x, y))”

  • naturalLanguageDefinition = “planned process in which the temperature of a material entity is raised in a controlled manner to a specified setpoint, typically to transition it from a solid or frozen state to a soft or liquid state”@en-US

  • semiFormalNaturalLanguageAxiom = “if x is a ‘thawing process’ then x is a ‘planned process’ and ‘has participant at some time’ some ‘piece of equipment’ that ‘has capability’ some ‘thawing capability’”

  • firstOrderLogicAxiom = “ThawingProcess(x) → PlannedProcess(x) ∧ (∃a (Agent(a) ∧ hasParticipantAtSomeTime(x, a)) ∨ ∃y ∃c (PieceOfEquipment(y) ∧ ThawingCapability(c) ∧ hasCapability(y, c) ∧ hasParticipantAtSomeTime(x, y)))”

  • naturalLanguageDefinition = “planned process in which the temperature of a material entity is raised in a controlled manner, typically to transition it from a solid or frozen state to a soft or liquid state”@en-US

  • semiFormalNaturalLanguageAxiom = “if x is a ‘thawing process’ then x is a ‘planned process’ and ‘has participant at some time’ some ‘agent’ or some ‘piece of equipment’ that ‘has capability’ some ‘thawing capability’“@en-US

Axioms

  • SubClassOf: bfo:has_participant_at_some_time some (constr:PieceOfEquipment and constr:hasCapability some constr:ThawingCapability)

  • SubClassOf: bfo:has_participant_at_some_time some (constr:Agent or (constr:PieceOfEquipment and constr:hasCapability some constr:ThawingCapability))


UltrafiltrationProcess

  • IRI: https://spec.industrialontologies.org/ontology/construct/UltrafiltrationProcess

Annotations

  • example = “Ultrafiltration is used in cheese making to concentrate casein and whey proteins while removing water, lactose, and soluble components; In mAb production, ultrafiltration concentrates antibody solutions before formulation; Ultrafiltration is applied to remove host cell proteins and as part of buffer exchange before viral filtration”

  • explanatoryNote = “1) Ultrafiltration (UF) is a variety of membrane filtration in which forces such as pressure or concentration gradients lead to a separation through a semipermeable membrane. Suspended solids and solutes of high molecular weight are retained in the so-called retentate, while water and low molecular weight solutes pass through the membrane in the permeate (filtrate). 2) The stated pore-size values indicate the characteristic scale associated with ultrafiltration and are not intended to establish exact lower or upper classification boundaries. A membrane filtration process may still be classified as an ultrafiltration process when the nominal pore-size rating lies near or modestly outside this interval, provided that the membrane and its retention performance are recognized as ultrafiltration.”

  • naturalLanguageDefinition = “filtration process in which a membrane filter that is used has pore size in the range of 0.01 to 0.1 μm”@en-US

  • example = “Ultrafiltration is used in cheese making to concentrate casein and whey proteins; In monoclonal antibody manufacturing, ultrafiltration concentrates antibody solutions before formulation; Ultrafiltration combined with diafiltration enables buffer exchange while retaining therapeutic proteins”@en-US

  • acronym = “UF”

  • adaptedFrom = “http://purl.obolibrary.org/obo/CHMO_0001645”

  • explanatoryNote = “1) In ultrafiltration, macromolecules or colloidal constituents are preferentially retained in the retentate, while solvent and smaller or otherwise less-retained constituents may pass through the membrane into the permeate. Retention need not be complete and depends on the membrane’s characteristics, the properties of the constituents being separated, and the operating conditions. 2) Ultrafiltration membranes are commonly characterized by molecular-weight cutoff (MWCO) or nominal pore size. IUPAC, for example, reports a usual membrane pore-size range of approximately 0.001–0.1 µm. Reported ranges and classification conventions vary across sources, membrane types, and applications, and may overlap with those associated with nanofiltration. These values are indicative rather than strict classification boundaries. Classification should consider the separation objective and the membrane’s specified or demonstrated retention performance, rather than nominal pore size alone.”@en-US

  • naturalLanguageDefinition = “membrane filtration process in which a membrane preferentially restricts the passage of macromolecules or colloidal constituents of a fluid”@en-US


Back to top

Copyright © 2024–2026 Open Applications Group / Industrial Ontology Foundry. Distributed under an MIT license.